%% @texfile{ %% filename="userdoc.ins", %% version="2.1", %% date="11-SEP-1991", %% filetype="AMSFonts: documentation", %% copyright="Copyright (C) American Mathematical Society, %% all rights reserved. Copying of this file is %% authorized only if either: %% (1) you make absolutely no changes to your copy %% including name; OR %% (2) if you do make changes, you first rename it to some %% other name.", %% author="American Mathematical Society", %% address="American Mathematical Society, %% Technical Support Group, %% P. O. Box 6248, %% Providence, RI 02940, %% USA", %% telephone="401-455-4080 or (in the USA) 800-321-4AMS", %% email="Internet: Tech-Support@Math.AMS.com", %% codetable="ISO/ASCII", %% checksumtype="line count", %% checksum="692", %% keywords="amsfonts, tex, installation", %% abstract="This file contains the TeX source for %% the AMSFonts 2.1 Installation Guide for the PC and the Macintosh. %% This file should be typeset using Plain TeX, NOT AMS-TeX or LaTeX. %% This file is input by userdoc.tex to include it in the entire %% AMSFonts 2.1 User's Guide." %% } % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \input userdoc.def \font\tenss=cmss10 \font\tenbti=cmbxti10 \def\bs{$\backslash$} \newbox\usertypebox \long\def\usertype#1{\setbox\usertypebox\hbox{\hskip2pc\tenss#1} \par\smallskip{\let\oldpar=\par\def\par{ \oldpar\leavevmode\hbox to 0pt {\ifdim1\wd\usertypebox>10pc\hskip1\wd\usertypebox\hskip1pc \else\hskip10pc\fi \rm $\langle$return$\rangle$\hss}\hskip2pc}\par\tenss#1} \par\smallskip} \catcode`\@=11 \def \runhead{\vbox to \rheadlgt{% \line{\ninepoint\rm \makestrut[\rtitlebaseline;\z@]% \ifodd\pageno \hfil\appendixtitlex\hfil\hbox to\z@{\hss\number\pageno}% \else \hbox to \z@{\number\pageno\hss}\hfil\appendixtitlex\hfil \fi }% \vfil }} \catcode`\@=\other \def \appendixtitlex{Installation Procedures -- PC} \maintitle Appendix A\break Installation Guide for AMSFonts 2.1 on the PC\\\fontsreleasedate< \title{A. Introduction} AMSFonts are a set of fonts which were developed at the American Mathematical Society (except the cyrillic fonts, which were developed at the University of Washington), for use with the \TeX\ typesetting system. These fonts were intended for use with the \AmSTeX\ or \AmS-\LaTeX\ macro packages, but they can be used with plain \TeX\ also, independently of these packages. AMSFonts can be used with any full implementation of \TeX . The installation procedure automatically installs the fonts on your IBM PC or compatible machine. In this guide, it is assumed that you have \TeX\ installed on your PC, and that you have at least some familiarity with it. \title{B. If you own a release of AMSFonts prior to version 2.0} If you own a release of AMSFonts earlier than version 2.0, then you must delete those fonts from your hard disk. Find where your printer driver or screen previewer looks for the .pk files which it uses. If you use a driver from Personal \TeX, Inc., then probably those fonts are in subdirectories of a directory named {\tt\bs pctex\bs pixel}. If you use a driver from ArborText, then probably those fonts are in subdirectories of a directory named {\tt\bs texpixel\bs ampixel} or {\tt\bs texpixel\bs cmpixel}. If your device driver is made by someone other than these two companies you will need to consult the documentation of that device driver in order to find the directory where it looks for .pk files of the fonts which it uses. Once you have determined where to look on your hard disk, backup onto diskettes and delete all occurrences (.tfm and .pk files) of the following files from the old release of AMSFonts: \smallskip {\parindent0pt \settabs\+msxm5 thru msxm10\qquad&msym5 thru msym10\qquad &eufm5 thru eufm10&\quad\cr \vbox{\leavevmode\hskip1pt\hfill\vbox{ \+ msxm5 thru msxm10 & msym5 thru msym10 & amcsc8 and 10&\cr \+ mcyr6 thru mcyr10& mcyb6 thru mcyb10 & eufm5 thru eufm10&\cr }\hfill\hskip1pt}} \smallskip All of these except the eufm fonts have been replaced by fonts with different names. The eufm fonts have been updated and improved. \title{C. If you have AMSFonts 2.1 without \AmSTeX\ 2.0+} If you purchased AMSFonts without the \AmSTeX\ 2.0+ macro package,\footnote*{\AmSTeX\ 2.0+ refers to any release of \AmSTeX\ from version 2.0 forward.} then you will first need to place the diskette labeled {\tt AMSFonts 2.1 TFM files} into drive A (or drive B, in which case you will substitute ``b'' for ``a'' in the following command), and copy the TFM files into the directory where your other TFM files are stored. If you are using PC\TeX, then enter \usertype{copy a:\bs tfm\ \ c:\bs pctex\bs textfms} \noindent to copy the \TeX\ font metric (TFM) files to your hard disk. If you are using an implementation of \TeX\ other than PC\TeX, you will substitute the name of your TFM directory for {\tt \bs pctex\bs textfms}, and if you have \TeX\ installed on a drive other than C, you will substitute its drive name for ``c:'' in the above command. After copying the TFM files, proceed with Section E. \goodbreak \title{D. If you have \AmSTeX\ 2.0+} The TFM files are installed automatically as part of the installation of \AmSTeX\ 2.0+. If you have not yet installed \AmSTeX\ 2.0+, you should either install it or perform step C above before you proceed with section E. \title{E. How much disk space do you need?} The amount of disk space required for installation of the AMSFonts depends on the resolution of your output device and on which families of fonts you choose to install. The fonts have been divided into five families for the installation, and you may choose any or all of these families to install. Also, you may choose to install all of the magnifications or only magnifications 100\%, 109.5\% and 120\% (\TeX\ magsteps 0, $1\over 2$ and 1). For a more complete description of these families and magnifications, please see the appropriate sections of the {\it AMSFonts 2.1 User's Guide\/}. (Note: If you do not have a printed copy of the {\it User's Guide\/}, you may use the files {\tt userdoc.*} on the TFM disk to produce it with \TeX. However, you will not be able to print the entire document correctly until after you have installed AMSFonts.) The following table lists all of the families and the disk space required for their installation. Before you begin the installation, decide which fonts and which magnifications you will choose, and make sure that you have enough disk space available. %%%%%%%%%%%%%%%%%%% this is the table of required disk space \bigskip \centerline{\bf Approximate Disk Space Required for AMSFonts Installation} \bigskip \vbox{\leavevmode\hskip0pt\hfill\vbox{\parindent0pt {\font\eightrm=cmr9 \eightrm \def\dropentry#1{\lower.5\baselineskip\hbox{#1}} \settabs\+400dpi\ &100\% thru 120\%\ \ &\hskip3pc&\hskip3pc &\hskip3pc&\hskip3pc&\hskip3pc&\hskip3pc&\cr \newbox\tablerulebox \setbox\tablerulebox=\vbox{\+400dpi\ &100\% thru 120\%\ \ &\hskip3pc &\hskip3pc&\hskip3pc&\hskip3pc&\hskip3pc&\hskip3pc&\cr} \def\tablerule{\smallskip\hrule width 1\wd\tablerulebox \smallskip} \+&&\hss Extra\hss&\hss Euler\hss&\hss Other\hss&\hss Extra\hss&\hss \hss&\hss All\hss&\cr \+&&\hss CM\hss&\hss Fraktur\hss&\hss Euler\hss&\hss Symbols\hss&\hss Cyrillic\hss&\hss Fonts\hss&\cr \tablerule \+\dropentry{118dpi}&100\% thru 120\%\hss&\hss\ 200K\hss&\hss\ 150K\hss&\hss\ 350K\hss&\hss\ 150K\hss&\hss\ 250K\hss&\hss 1100K\hss&\cr \+&all mags\hss&\hss\ 550K\hss&\hss\ 350K\hss&\hss\ 850K\hss&\hss\ 450K\hss&\hss\ 750K\hss&\hss 2950K\hss&\cr \tablerule \+\dropentry{180dpi}&100\% thru 120\%\hss&\hss\ 250K\hss&\hss\ 150K\hss&\hss\ 350K\hss&\hss\ 200K\hss&\hss\ 300K\hss&\hss 1250K\hss&\cr \+&all mags\hss&\hss\ 750K\hss&\hss\ 450K\hss&\hss\ 950K\hss&\hss\ 650K\hss&\hss 1000K\hss&\hss 3800K\hss&\cr \tablerule \+\dropentry{240dpi}&100\% thru 120\%\hss&\hss\ 300K\hss&\hss\ 150K\hss&\hss\ 350K\hss&\hss\ 250K\hss&\hss\ 400K\hss&\hss 1450K\hss&\cr \+&all mags\hss&\hss\ 900K\hss&\hss\ 500K\hss&\hss 1000K\hss&\hss\ 800K\hss&\hss 1200K\hss&\hss 4400K\hss&\cr \tablerule \+\dropentry{300dpi}&100\% thru 120\%\hss&\hss\ 350K\hss&\hss\ 200K\hss&\hss\ 450K\hss&\hss\ 350K\hss&\hss\ 500K\hss&\hss 1850K\hss&\cr \+&all mags\hss&\hss 1100K\hss&\hss\ 700K\hss&\hss 1300K\hss&\hss\ 1000K\hss&\hss 1500K\hss&\hss 5600K\hss&\cr \tablerule \+\dropentry{400dpi}&100\% thru 120\%\hss&\hss\ 450K\hss&\hss\ 250K\hss&\hss\ 500K\hss&\hss\ 400K\hss&\hss\ 550K\hss&\hss 2150K\hss&\cr \+&all mags\hss&\hss 1450K\hss&\hss\ 825K\hss&\hss 1625K\hss&\hss 1250K\hss&\hss 1850K\hss&\hss 7000K\hss&\cr \tablerule } }\hfill\hskip1pt} %%%%%%%%%%%%%%%%%%%%%%%%%%% end of table \title{F. Where do you put the fonts?} Now you will need to copy the .pk files which are the actual raster images for the fonts. These are spread over several disks (the actual number depends on the resolution of the output device), in seven directories. These seven directories represent the fonts at seven different magnifications available in \TeX: \bs magstep 0, $1\over2$, 1, 2, 3, 4, and 5. The directories are labeled {\tt \bs amsfonts\bs dpiXXX}, where {\tt XXX} is the resolution of the output device multiplied by the magnification. (The number is rounded to the nearest integer.) For example, the subdirectory containing raster images for 300 dot per inch output at \bs magstep1 (120\%) will be called {\tt \bs dpi360}, since 300 multiplied by 1.2 equals 360. To install the fonts, find where the .pk files for your other fonts are stored on your hard disk. This is determined by the needs of the device driver which will read the fonts. If you are installing these fonts for screen previewing they should go where your previewer will find them. If you are installing the fonts for printing they should go where your printer driver can find them. If you are using a device driver from Personal \TeX, Inc., then most likely your other \TeX\ fonts are stored in subdirectories of {\tt \bs pctex\bs pixel}. If you are using a device driver from ArborText, then most likely your other \TeX\ fonts are stored in subdirectories of {\tt\bs texpixel\bs cmpixel}. If your device driver is made by someone other than these two companies you will need to consult the documentation of that device driver in order to find the directory where it looks for .pk files of the fonts which it uses. \title{G. Running the installation procedure} When you have determined where you are going to put the fonts, insert the first of the disks labeled {\tt AMSFonts 2.1 XXXdpi} (where {\tt XXX} is the resolution of your output device) into drive A or drive B, and type the following commands (if you put the disk in drive B, you will substitute `b' for `a' in the first command): \usertype{a: install} You will be asked a number of questions. First, you will have to give the name of the hard drive on which you will install the fonts. Then, you will be asked for the name of the directory where you want the fonts to be placed. Next, you will be asked whether you wish to install all of the magnifications or only the magnifications 100\%, 109.5\%, and 120\%. Finally, you will be asked whether you wish to install all of the families of fonts or only certain families. (If you skipped Section E above, please go back and read it.) Once you have answered all of the questions, you will be prompted to insert the remaining disks of the distribution. The .pk files will be placed in subdirectories of the specified font directory, named {\tt \bs dpiXXX}, where {\tt XXX} again represents the resolution multiplied by the magnification. \title{H. Additional notes for users of AMSFonts} The device driver with which you are using these fonts may have a font table which needs to be updated in order for the driver to recognize the fonts. For instance, the \TeX\ Preview software provided by ArborText has a file called {\tt preview.fnt} which contains the names of all fonts which the Preview program is expected to find, and the effective resolutions (resolution multiplied by magnification) at which to find them. In order to use AMSFonts with this, or any other software which uses such a table, you must enter the names of each of the fonts in the AMSFonts package and the effective resolutions at which you have them installed. The file {\tt amsfonts.lst} on the first distribution disk contains a list of all of the font names and all of the resolutions contained in your distribution. You may have to alter the format of this file to make it conform to your driver's needs or to reflect installation of only some of the fonts, but it provides you with the necessary data. See the documentation for your device driver to see what format is required. If your device driver does not depend on such a table, this step is not necessary. \title{I. For further information.} Questions or comments concerning AMSFonts 2.1 can be directed to: \tenrm \bigskip \parindent1in\parskip0pt Technical Support American Mathematical Society P.O. Box 6248 Providence, RI 02940 800-321-4AMS \quad or \quad 401-455-4080 Internet: tech-support@Math.AMS.com \vfill\eject %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \def \appendixtitlex{Installation Procedures -- Macintosh} \def\Textures{{\it Textures\/}} \maintitle Appendix B\break Installation Guide for AMSFonts 2.1 on the Macintosh (with \Textures{})\\August 1991< \tenrm \title {A. Introduction} AMSFonts are a set of fonts which were developed at the American Mathematical Society (except the cyrillic fonts, which were developed at the University of Washington), for use with the \TeX{} typesetting system. These fonts were intended for use with the \AmSTeX{} or \AmS-\LaTeX{} macro packages, but they can be used with plain \TeX{} also, independently of these packages. This distribution is designed for use with the \Textures{} software on the Macintosh computer. These fonts require \Textures{} version 1.2 or higher. If you have an earlier release of \Textures, you must upgrade before using these fonts. To upgrade \Textures, contact the manufacturer: Blue Sky Research, 534 SW Third Ave., Portland, OR 97204; (800) 622-8398. In this guide, it is assumed that you have a recent version of \Textures{} installed on your Macintosh, and that you have at least some familiarity with it and with {\it The \TeX book}. You have received either the standard distribution or the extended distribution. The standard distribution contains fonts in resolutions and magnifications corresponding to those included in the standard \Textures{} distribution of Computer Modern fonts. The standard distribution is contained on three diskettes and has a fairly simple installation procedure. The extended distribution includes the fonts at several larger magnifications, in addition to the magnifications included in the standard distribution. That distribution is contained on six high-density (1.4M) diskettes, and its installation will require some decisions on your part. Before you begin the installation you should first backup to diskette all files from previous releases of AMSFonts that are on your hard disk. (This includes AMSFonts 2.0 if you received that distribution.) Once you are sure that you have backed up all files containing previous releases of AMSFonts, delete them from your hard disk. You will have serious font ID conflicts if you do not do this. (See Section E.2 for an explanation.) \title {B. Installation of the Standard Distribution} \section {B.1. What is on the diskettes?} The distribution contains three diskettes. The first disk contains a folder with some \Textures{} files, the file {\tt AMSFonts 2.1 metrics}, and the cyrillic text fonts. The {\tt Textures files} folder contains eight files. Most of these files are explained in the {\it AMSFonts 2.1 User's Guide}. The \TeX{} source for the user's guide is in the files {\tt userdoc.*} in the {\tt Textures files} folder. The file {\tt userdoc.ins} is the \TeX\ source for the installation guide you are now reading. The second disk contains the extra CM fonts and the AMS Symbol fonts (MSAM and MSBM). The third disk contains the Euler fonts: Euler Fraktur (EUFB and EUFM), Euler Roman (EURB and EURM), Euler Script (EUSB and EUSM), and Euler Extension (EUEX). \section {B.2. How much space do you need?} Fonts take up lots of disk space. AMSFonts includes 89 fonts, each at either four or six resolutions (see Section E.1 for an explanation). This standard distribution takes up nearly four megabytes when installed. The table below shows the disk space required for each font suitcase file in this distribution. Consult it to make sure that you have enough space on your hard disk to install the fonts you need. \medskip \centerline{\bf Approximate Disk Storage Requirements (Standard)} \vskip-6pt $$\vcenter{\halign{\hfill#\qquad&#\hfill\cr 1600K &Extra CM fonts and AMS Symbol fonts\cr 288K &Euler Fraktur fonts\cr 1150K &All other Euler fonts\cr 986K &Cyrillic fonts\cr }}$$ \long\def\InstallSteps#1{% Since you will be installing new fonts it would be wise to review the portions of the \Textures{} manual relating to fonts. \Textures{} has a complex method of including fonts and you should understand it before attempting to install or use AMSFonts. You may also wish to read the {\it AMSFonts 2.1 User's Guide} to decide which families of fonts you need to install. If you retrieved this distribution electronically and have no printed copy of the user's guide, you can find the \TeX\ source for that document in the files {\tt userdoc.*} in the {\tt Textures files} folder on the first distribution disk. \section {#1.3. Installing the fonts.} \parindent\normalparindent \item{1. }Copy the file {\tt AMSFonts 2.1 metrics} from the first distribution disk to the {\tt TeX Fonts} folder inside the {\tt Textures} folder on your hard disk. \item{2. }Decide which families of fonts you want to install on your system. For a full description of these families, see the appropriate section of the {\it AMSFonts 2.1 User's Guide.} \item{3. }Make sure you have enough space on your hard disk for the families which you wish to install. See the table above for the amount of space required. \item{4. }Extract the font files from the compressed files for each of the families which are to be installed. This is done in the following way. \itemitem{4.1 }Double-click on the icon for the compressed file. \itemitem{4.2 }In the dialog box which appears, click the ``Drive'' button so that the name of your hard disk appears at the top. \itemitem{4.3 }Double-click on the name of your {\tt Textures} folder in the scroll box. \itemitem{4.4 }Double-click on the name of the {\tt TeX Fonts} folder in the scroll box. \itemitem{4.5 }Click ``Install''. When the AutoUnStuffIt installer finishes, there will be a new font suitcase file in your {\tt Tex Fonts} folder. \medskip You are now able to use AMSFonts in \Textures. However, please read Sections D and E before attempting to use AMSFonts in \Textures. } % end of definition of \InstallSteps \InstallSteps B \title{C. Installation of the Extended distribution} \section {C.1. What is on the diskettes?} The distribution contains six high-density diskettes. The first disk contains a folder with some \Textures{} files, the file {\tt AMSFonts 2.1 metrics}, and the AMS Symbol (MSAM and MSBM) fonts. The {\tt Textures files} folder contains eight files. Most of these files are explained in the {\it AMSFonts 2.1 User's Guide}. The \TeX{} source for the user's guide is in the files {\tt userdoc.*} in the {\tt Textures files} folder. The file {\tt userdoc.ins} is the \TeX\ source for the installation guide you are now reading. The other disks include the other AMSFonts, as indicated on their diskette labels: \vskip-6pt $$\vcenter{\halign{#&#\cr Disk 2\quad &Extra CM Fonts (CMBSY, CMCSC, CMEX, CMMIB)\hfill\cr Disk 3\quad &Euler Fraktur and Extension (EUF and EUEX)\hfill\cr Disk 4\quad &Euler Roman and Script (EUR and EUS)\hfill\cr Disk 5\quad &Cyrillic Upright and Italic (WNCYR and WNCYI)\hfill\cr Disk 6\quad &Cyrillic Bold, Sans-Serif and Cap-small-cap\hfill\cr \quad &(WNCYB, WNCYSS, WNCYSC)\hfill\cr }}$$ \section {C.2. How much space do you need?} Fonts take up lots of disk space. AMSFonts includes 89 fonts, each at either nine or eleven resolutions (see Section E.1 for an explanation). This extended distribution takes up over 20 megabytes of disk space. The table below shows the disk space required for each font family. Consult it to make sure that you have enough space on your hard disk to install the fonts you need. \medskip \settabs2\columns \centerline{\bf Approximate Disk Storage Requirements (Extended)} $$\vcenter{\halign{\hfill#\qquad&#\hfill\cr 5500K &Extra CM fonts\cr 3200K &Euler Fraktur and Extension fonts\cr 2700K &Euler Roman and Script fonts\cr 4000K &AMS Symbol fonts\cr 5500K &Cyrillic fonts\cr }}$$ \medskip \InstallSteps C \title{D. Customizing Your Own Installation} \section {D.1. Defining macros for the symbol fonts.} The files {\tt amssym.def} and {\tt amssym.tex} are included in the {\tt Textures files} folder on the first disk of your distribution. These files are for use with the AMS symbol fonts (MSAM and MSBM). If you will be using these fonts you should place both of these files in the {\tt TeX inputs} folder within your {\tt Textures} folder. The use of these files is described in the {\it AMSFonts 2.1 User's Guide\/}. \section {D.2. Adding fonts for display and printing.} As is explained in the \Textures{} manual, the Show Fonts command displays those fonts whose font metrics are currently available to \Textures. Additionally, when a font is selected the two scroll boxes in the Show Fonts dialog box display the point sizes available for display or printing. When \Textures{} has opened {\tt AMSFonts 2.1 metrics}, this permits \TeX\ to run without errors on files with references to AMSFonts. However, it does not enable their display or printing. To enable display and printing you may use Add Fonts to bring in raster information from any of the font suitcases which you created by unstuffing the files in the distribution. It is not necessary to keep using the menu item Add Fonts to import AMSFonts. You will probably determine through your own use which fonts you frequently use. Using {\it Font/DA Mover\/} from your Macintosh system software, you can construct a font file which contains these fonts, and place it in the {\tt TeX fonts} folder inside your {\tt Textures} folder. Make sure that the file {\tt AMSFonts 2.1 metrics} is also in this folder. {\it (Note: Users who have upgraded to System 7 need not use {\rm Font/DA Mover}. They should use the System 7 conventions for moving fonts between suitcases.)} \section {D.4. Consolidating AMSFonts suitcase files.} AMSFonts were distributed in several different suitcase files so they would fit on individual disks for distribution and installation. \Textures{} and the Macintosh system will have a much easier time if you open fewer files. You should use {\it Font/DA Mover\/} (or System 7 conventions for moving fonts) to create a new file which includes the contents of several of the font suitcases which were provided in the distribution. {\bf If you have the Standard Distribution,} you may consolidate all three of the distribution suitcase files into one. Another alternative would be to simply not install some of the suitcases. The file on disk 2 (which includes extra CM fonts and AMS symbol fonts), along with Euler Fraktur from disk 3, are all that the majority of users of AMSFonts will need. {\bf If you have the Extended Distribution,} you should consolidate the font suitcases as much as possible. If, like many users of AMSFonts, you use only the AMS Symbols, Euler Fraktur, and Extra CM fonts, you can consolidate all of these into a single suitcase file. If you use all of the fonts, you will need to use at least three suitcases unless you have upgraded to System 7, in which case two suitcases can contain the entire distribution. Users who have not upgraded to System 7, please read Section E.3 for important information about {\it Font/DA Mover}. \title{E. Questions and Further Information} \section{E.1. Why are some fonts included at fewer sizes?} You may have noticed that all of the AMSFonts (except the extra CM fonts), are included at two fewer magnifications than the \Textures{} distribution fonts. This is because several AMSFonts do not give good results when run through \MF\ at very low resolutions, such as the 72dpi Macintosh screen resolution. Because of the way in which the Macintosh system scales fonts when it doesn't have a font in the exact size it wants, the magnifications included in the distribution give the best combination of screen previewing and ImageWriter output for the AMSFonts. LaserWriter output is not affected in any way by this. LaserWriter output is always determined from the fonts at 417\% and higher, which are handled in the same manner for all AMSFonts. \section{E.2. Help! The font doesn't display correctly!} The Macintosh system has a very ingenious way of handling fonts. Unfortunately, this ingenious and complex system sometimes leads to problems. There is a resource ID number for every point size of every font. For NFNT resources (the kind used for AMSFonts 2.1), these ID numbers are assigned arbitrarily by Macintosh software when a resource is moved into a font suitcase file. Within a single file, the Macintosh software prevents any duplication of these ID numbers. Conflicts of ID numbers can (and occasionally will) occur when you have many different suitcase files open at the same time. This is one of the reasons for the instructions in Section D.4 --- the fewer suitcases you have, the less likelihood of conflicts. When a font ID conflict does occur, a font which you didn't want will be substituted for the font you wanted, at only a single point size at a single magnification. If all other sizes and magnifications of that font are the correct font, and if the font displays correctly when you View the document on the screen at a different magnification, it is a font ID conflict. To remedy this problem, do the following: \medskip \item{A. }If you {\bf have not} upgraded to System 7: \itemitem {1. }Double-click on the icon for the font suitcase file containing the font which you were not able to display. \itemitem {2. }When {\it Font/DA Mover\/} starts, open a new temporary file on the right-hand side of the window. \itemitem {3. }Copy all sizes of the problem font from the original file into the temporary file, and remove them from the original file. \itemitem {4. }Copy the fonts back into the original file. \itemitem {5. }Quit {\it Font/DA Mover\/}, and delete the temporary file which you created. \medskip \item{B. }If you {\bf have} upgraded to System 7: \itemitem{1. }Create a temporary folder on your hard disk. \itemitem{2. }Double-click on the icon for the font suitcase file containing the font which you were not able to display. \itemitem{3. }In the new window showing the contents of that file, select all sizes of the problem font and drag them into the temporary folder which you created. \itemitem{4. }Open a window showing the contents of the temporary folder, select all of the contents, and drag them back into the font suitcase file. When asked if you want to replace existing ones, answer OK. \itemitem{5. }Delete the temporary folder. \medskip These steps will cause the Macintosh system software to assign new arbitrary numbers to the NFNT resources in question and should clear up the conflict. \section{E.3. Important information about {\tenbti Font/DA Mover}} If you are not using System 7, please take note of the following: \item{1. } You must have {\it Font/DA Mover\/} Version 3.8 or later. Previous releases will not recognize font resources of the type used for AMSFonts 2.1. \item{2. } Even Version 3.8 of {\it Font/DA Mover\/} has a bug of which you should be aware. If you copy a font of the type used for AMSFonts 2.1 into a file more than once, you will very likely end up with two copies of the font in that file. If you notice that this has occured, simply delete one occurence. \goodbreak \section{E.4. For further information.} Questions or comments concerning AMSFonts 2.1 can be directed to: \tenrm \bigskip \parindent1in\parskip0pt Technical Support American Mathematical Society P.O. Box 6248 Providence, RI 02940 800-321-4AMS \quad or \quad 401-455-4080 Internet: tech-support@Math.AMS.com \bigskip \noindent Questions or comments concerning \Textures{} can be directed to: \tenrm \bigskip \parindent1in\parskip0pt Blue Sky Research 534 Southwest Third Avenue Portland, OR 97204 800-622-8398 \quad or \quad 503-222-9571 \ifx\FullUserDoc\undefined\else\endinput\fi \bye