;
; Used by Standard TCP/IP Port Monitor to determine the type of port
;
;
; Section names should be less than 60 characters
;

[Ports]
"HP *J.sp.00*" 			= HP_JD_EX_1
"HP *JETDIRECT EX*" 		= HP_JD_EX
"HP *"				= HP_Jetdirect
"Lexmark Optra *"		= Lexmark_Optra
"Lexmark MarkNet XLe 302*"	= Lexmark_ex_3
"MarkNet Pro 3*"                = Lexmark_ex_3
"Marknet Pro 1*"		= Lexmark_ex_1
"Lexmark MarkNet XLe 202*"	= Lexmark_ex_2
"IBM Network*"			= IBM_NP
"NetportExpress*PRO* 3-port*"  	= Intel_PRO_3
"NetportExpress*PRO* single*"  	= Intel_PRO_1
"NB*"				= Canon
"NetQue*"			= Emulex_ex
"NETJet*"			= Emulex_MIO
"Xerox SESS SNMP Agent*"	= Xerox_dcs

[Lexmark_Optra]
PORTS		= 1
NAME		= "Lexmark-Netzwerkdrucker"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "Yes"

[Lexmark_ex_3]
NAME		= "Externer Lexmark-Druckserver (3-Anschluß)"
PORTS		= 3
PROTOCOL1	= "RAW"
NAME1		= "Parallel 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"
PROTOCOL2	= "RAW"
NAME2		= "Parallel 2"
PORTNUMBER1	= 9102
SNMP2		= "NO"
PROTOCOL3	= "RAW"
NAME3		= "Seriell"
PORTNUMBER1	= 9109
SNMP3		= "NO"

[Lexmark_ex_2]
NAME		= "Externer Lexmark-Druckserver (2-Anschluß)"
PORTS		= 2
PROTOCOL1	= "RAW"
NAME1		= "Parallel 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"
PROTOCOL2	= "RAW"
NAME2		= "Parallel 2"
PORTNUMBER1	= 9102
SNMP2		= "NO"

[Lexmark_ex_1]
NAME		= "Externer Lexmark-Druckserver (Einzelanschluß)"
PORTS		= 1
PROTOCOL1	= "RAW"
NAME1		= "Parallel 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"

[HP_Jetdirect]
PORTS		= 1
NAME		= "Hewlett-Packard Jet Direct"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "?"

[HP_JD_EX_1]
NAME		= "Hewlett-Packard JetDirect Ex (Einzelanschluß)"
PORTS		= 1
NAME1		= "Parallel"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "?"

[HP_JD_EX] 
NAME		= "Hewlett-Packard JetDirect Ex"
PORTS		= 3
PROTOCOL1	= "RAW"
COMMUNITYNAME1  = "public"
PORTNUMBER1	= 9100
SNMP1		= "?"
NAME1		= "Parallel 1"
protocol2	= "RAW"
COMMUNITYNAME2  = "public2"
portnumber2	= 9101
snmp2		= "?"
name2		= "Parallel 2"
protocol3	= "RAW"
COMMUNITYNAME3  = "public3"
portnumber3	= 9102
name3		= "Parallel 3"
snmp3		= "?"

[IBM_NP]
PORTS		= 1
NAME		= "IBM-Netzwerkdrucker"
PROTOCOL1	= "LPR"
QUEUE1		= "PASS"
SNMP1		= "Yes"

[Intel_PRO_3]
name		= "Intel Netport Pro (3-Anschluß)"
PORTS		= 3
NAME1		= "Parallel1"
QUEUE1		= "PASS_LPT1"
NAME2		= "Parallel2"
QUEUE2		= "PASS_LPT2"
NAME3		= "Seriell"
QUEUE3		= "PASS_COM"
PROTOCOL1	= "LPR"
protocol2	= "LPR"
protocol3	= "LPR"
SNMP1		= "NO"
snmp2		= "NO"
snmp3		= "NO"

[Intel_PRO_1]
name		= "Intel Netport Pro (Einzelanschluß)"
PORTS		= 1
NAME1		= "Parallel1"
QUEUE1		= "PASS_LPT1"
PROTOCOL1	= "LPR"
SNMP1		= "NO"

[Canon]
Name		= "Canon-Netzwerkdrucker"
ports		= 1
protocol1	= "LPR"
queue1		= "x"
snmp1		= "yes"

[Xerox_dcs]
name		= "Xerox DCS"
ports		= 1
protocol1	= "LPR"
queue1		= "lp"
snmp1		= "no"

[Emulex_MIO]
name		= "Interne Emulex MEA-Karte"
ports		= 1
protocol1	= "LPR"
queue1		= "PASSTHRU"
snmp1		= "NO"

[Emulex_ex]
name		= "Emulex NetQue"
ports		= 2
name1		= "Parallel"
protocol1	= "RAW"
portnumber1	= 2501
snmp1		= "no"
name2		= "Seriell"
protocol2	= "RAW"
portnumber2	= 2502
snmp2		= "no"